TECO TFF210WNTBM User Manual page 12

STEP 3. Bottom Hinge
A) Remove both adjustable feet by completely
unscrewing them.
B) Remove the screws holding the bottom hinge and
remove the bottom hinge.
STEP 4.
A) Screw the adjustable foot into the right side.
B) Fasten the bottom hinge into place on the left side.
NOTE: Do not fasten completely until after the door has been
correctly positioned. Allow for minor adjustment and gasket seal.
C) At the bottom of the door, remove the hinge assembly and fasten
the door stop and hinge assembly by screwing into place.
D) Place the freezer door onto the bottom hinge.
STEP 5.
A) Place the top hinge into position on the left side.
B) Fasten the top hinge and ensure the door gasket seals correctly.
C) Align the door in place, ensure it can open/close without
obstruction and securely seals.
D) Tighten the hinge screws for both top, middle and bottom hinges.
E) Replace the top hinge cover (refer to item 1 on Page 7) and clip
in place.
3 5
12