Checking The Play Information - Sony DVP-K350 Operating Instructions Manual

Digital Cinema Sound Settings
VIRTUAL SEMI MULTI DIMENSION
Uses 3D sound imaging to create virtual rear speakers
from the sound of the front speakers (L, R) without using
actual rear speakers. This mode creates 5 sets of virtual
speakers surrounding the listener at a 30˚ angle of
elevation.
L
z
You can select "VES" directly
Press VES on the player. Each time you press the button, the item
changes.
Notes
• When you select an item, the sound cuts off for a moment.
• When the playing signal does not contain the surround
component, the effects may be difficult to hear even if you
select "VES TV," "VES A," "VES B" or "VIRTUAL SEMI MULTI
DIMENSION."
• Set the front speakers to form an equilateral triangle with the
listening position at the top, or the effects may be difficult to
hear even if you select "VES A," "VES B" or "VIRTUAL SEMI
MULTI DIMENSION."
• When you select "VES TV," "VES A," "VES B" or "VIRTUAL
SEMI MULTI DIMENSION," set the surround settings of the
connected units, such as the amplifier, to OFF.
36
R
Checking the Play
Information
You can check information such as the bit rate or the disc
layer that is being played.
While playing a disc, the approximate bit rate of the
playback picture is always displayed as Mbps (Mega bit
per second) and the audio as kbps (kilo bit per second).
Select "ADVANCED" after pressing DISPLAY.
1 2 ( 2 7 )
1 8 ( 3 4 )
C 0 1 : 3 2 : 5 5
BIT RATE
ADVANCED
Select:
x ADVANCED
The default setting is underlined.
When playing a DVD
• BIT RATE: displays the bit rate.
• LAYER: displays the layer and the pick-up point.
• OFF: turns off ADVANCED display.
PLAY
DVD
BIT RATE
kbps
1000
0
Mbps
0 5 10
ENTER