Checking The Play Information (Advanced) - Sony DVP-NS900V Operating Instructions Manual

Checking the Play
Information
(ADVANCED)
You can check information such as the bit
rate or the disc layer that is being played.
While playing a disc, an approximate bit rate
of the playback picture is always displayed as
Mbps (Mega bit per second) and the audio as
kbps (kilo bit per second).
DISPLAY
1
Press DISPLAY during playback.
The Control Menu is displayed.
2
Press X/x to select
(ADVANCED), then press ENTER.
The options for "ADVANCED"
appear.
1 2 ( 2 7 )
1 8 ( 3 4 )
T 1 : 3 2 : 5 5
BIT RATE
OFF
BIT RATE
LAYER
3
Press X/x to select items.
For each item, please refer to "Displays
of each item."
• BIT RATE: displays the bit rate.
• LAYER: displays the layer and the
pick-up point.
X/x
ENTER
PLAY
DVD VIDEO
BIT RATE
384 kbps
Mbps
10
0 5
4
Press ENTER.
To close the ADVANCED window
Select "OFF" in Step 3.
To turn off the Control Menu
Press DISPLAY repeatedly until the Control
Menu is turned off.
Displays of each item
By pressing DISPLAY repeatedly, you can
display either "BIT RATE" or "LAYER,"
whichever was selected in "ADVANCED."
BIT RATE
BIT RATE
384 kbps
Mbps
10
0 5
Bit rate refers to the amount of video/audio
data per second in a disc. The higher the bit
rate, the larger the amount of data. When the
bit rate level is high, there is a large amount
of data. However, this does not always mean
that you can get higher quality pictures or
sounds.
LAYER
Appears when the DVD
has dual layers
Indicates the approximate point where the
disc is playing.
If it is a dual-layer DVD, the player indicates
which layer is being read ("Layer 0" or
"Layer 1").
For details on the layers, see page 97 (DVD
VIDEO).
Audio
Video
57