Table of Contents
Advertisement
# vim /etc/asterisk/extensions.conf
[from-pstn]
exten => s,1,Answer()
exten => s,n,Dial(dahdi/1,,r)
exten => s,n,Hangup()
[from-internal]
exten => 200,1,Dial(dahdi/7/outgoing_number)
exten => 200,2,Hangup()
You should write the destination number instead of the
outgoing_number in the above dial plan. The above dial
plan achieves that when an extension telephone dials 200,
Asterisk will transfer through channel 7 to the destination.
While a call comes from PSTN line, Asterisk answers firstly, and then
gets through the extension set which connects to channel 1.
After saving your dialplan, please run "asterisk –r", then execute
"reload" in the CLI. Next you are able to make calls.
OpenVox Communication Co. LTD.
A1200P on DAHDI User Manual
Figure 10 dial plan
26
URL: www.openvox.cn
Advertisement
Table of Contents
