LG MULTI F Series Engineering Manual page 386

WIRING CONNECTIONS
Power Wiring (208-230V) and Communications Cable Details
Figure 99: Multi F LMU18CHV System Power Wiring and Communications Cable.
L1 L2
Power Supply
Main Switch
Circuit Breaker
Three-wire Power Wiring
(Including Ground)
POWER WIRING
COMMUNICATION CABLE
• All field-supplied wiring, components, and materials should follow national, state, and local codes and requirements.
• Use only stranded, shielded copper conductor.
• Ground wiring is required to prevent accidental electrical shock during current leakage, communication problems from electrical
noise, and motor current leakage. Do not connect the ground line to the pipes.
• Install a main shutoff switch or circuit breaker that interrupts all power sources simultaneously.
• Wiring cable size must comply with applicable national, state, and local codes.
386 | WIRING CONNECTIONS
G
L1
L2
Fuse
1(L1) 2(L2)
Indoor Unit Terminal Block
Unit A
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
Outdoor Unit
Outdoor Unit Terminal Block
G
L1 L2 1(L1) 2(L2) 3(A)
3 1(L1) 2(L2)
Indoor Unit Terminal Block
Unit B
F
MULTI
F
MULTI MAX
1(L1) 2(L2) 3(B)
3