Remak AeroMaster Cirrus Series Installation And Operating Instructions Manual page 24

Installation of Covering Roof
Horizontally Arranged Units
The roof slope for draining rainwater is created in the same way as with normal sloped roofs.

 The roof girders are combined according to the air-handling unit width and the required height (h1/h2) and spacing (B)
Figure 13
Covers for Overlapping Components
 Install the covers using 6.5 × 19mm roofing screws with rubber washers.
Figure 14
24
Air Handling Units
4M (1386mm)
5M (1692mm)
6M (1998mm)
7M (2304mm)
8M (2610mm)
9M (2916mm)
Figure 15
A h1 h2 B
(mm) (mm) (mm)
- 150 677
- 150 830
- 150 983
150 200 757
150 200 859
150 200 961