Table of Contents
Advertisement
Installation of Covering Roof
Install the cross-members using 6.5 × 19mm roofing
screws with rubber washers.
Figure 10
Bending and attaching the other roof segment end creates the roof slope (bending) required for draining rainwater.
Figure 11
Installation of Terminal Elements (closure ends)
Install the ends using 6.5 × 19 mm roofing screws with rubber washers.
Figure 12
Air Handling Units
Attach one side of the roof segments to the side roof
girders and then in the centre to the central roof girder.
23
Advertisement
Table of Contents
