Returning To The Default Settings - Sony DAV-HDX500 Operating Instructions Manual

3
Press X/x to select [CUSTOM], then
press
The Setup Display appears.
4
Press X/x repeatedly to select
[SPEAKER SETUP], then press
c.
5
Press X/x repeatedly to select [TEST
TONE], then press
6
Press X/x repeatedly to select [ON],
then press
You will hear the test tone from each
speaker in sequence.
7
From your listening position, adjust the
value of [LEVEL (FRONT)] or [LEVEL
(SURROUND)] using C/X/x/c.
The test tone is emitted from only the
speaker which you are adjusting.
8
Press
making adjustments.
9
Press X/x repeatedly to select [TEST
TONE], then press
10
Press X/x repeatedly to select [OFF],
then press
Note
• The test tone signals are not output from the HDMI
OUT jack.
94
US
.
or c.
.
when you have finished
.
.
Returning to the Default
Settings
or
You can return the system parameters, such as
preset stations, to the default settings.
"/1
1
Press "/1 to turn on the system.
2
Press x, A, and "/1 on the unit at the
same time.
"COLD RESET" appears in the front panel
display and the default settings are returned.
x
A