Sony DAV-HDX500 Operating Instructions Manual page 26

12
Press .
AUTO CALIBRATION
Connect calibration mic. Start
measurement?
YES
NO
Auto Calibration starts.
Note
• Loud test sound is output when [AUTO
CALIBRATION] starts. You cannot turn the
volume down. Give consideration to children
and neighbor.
• Avoid being in the measurement area and
making noise during the measurement (which
takes about 1 minute), as it may interfere with
measurement.
13
Unplug the calibration mic and press C/
c to select [YES].
Measurement complete.
FRONT L :
FRONT R :
CENTER :
SUBWOOFER :
SURROUND L :
SURROUND R :
If OK, unplug calibration mic and select
"YES".
YES
Note
• The environment of the room in which the
system is installed may affect measurements.
• If measurement fails, follow the message then
retry [AUTO CALIBRATION].
• When you select [SECOND ROOM] for
[SPEAKER FORMATION], measurement of
[SURROUND L] and [SURROUND R] is not
displayed.
14
Press .
Quick Setup is finished. All connections
and setup operations are complete.
To quit the Quick Setup
Press DISPLAY in any Step.
26
US
16ft 4.87m 0.0dB
16ft 4.87m 0.0dB
16ft 4.87m + 1.0dB
16ft 4.87m + 4.0dB
10ft 3.04m - 2.0dB
10ft 3.04m - 2.0dB
NO
Tip
• If you change the position of the speakers, reset the
speaker settings. See "Getting Optimal Surround
Sound for a Room" (page 82) and "Calibrating the
Appropriate Settings Automatically" (page 84).
• If you want to change any of the settings, see "Using
the Setup Display" (page 86).
To recall the Quick Setup display
1
Press DISPLAY when the system is in
stop mode.
The Control Menu display appears.
2
Press X/x to select
press .
The options for [SETUP] appear.
1 2 ( 2 7 )
1 8 ( 3 4 )
T 0 : 0 0 : 0 2
QUICK
QUICK
CUSTOM
RESET
BNR
3
Press X/x to select [QUICK], then press
The Quick Setup display appears.
[SETUP], then
DVD VIDEO
.