Enjoying The Radio Or Other Components - Sony DAV-HDX500 Operating Instructions Manual

Enjoying the Radio or
Other Components
X/x/c,
Selecting the connected
component
You can use a VCR or other components
connected to the SAT/CABLE or TV jacks on
the rear panel. Refer to the operating instructions
supplied with the components for further
information.
Press FUNCTION repeatedly until "SAT/
CABLE" or "TV" appears in the front panel
display.
Each time you press FUNCTION, the mode of
the system changes in the following sequence.
DVD t TUNER FM t TUNER AM t XM
t SAT/CABLE t TV t DMPORT1 t
DMPORT2 t AUDIO t ...
Note
• When you use both the SAT/CABLE (AUDIO IN)
jacks (analog connection) and SAT/CABLE
(COAXIAL or OPTICAL DIGITAL IN) jack (digital
connection) at the same time, the digital connection
takes priority.
Changing the input level of
the sound from connected
components
Distortion may occur when listening to a
component connected to the SAT/CABLE or
TV jacks on the rear panel or to the AUDIO IN
FUNCTION
jack on the front panel. This is not a malfunction
and will depend on the component connected.
To prevent this, you can change the input level
from the sound of the other components.
1
Press FUNCTION repeatedly until
"SAT/CABLE," "TV," or "AUDIO"
appears in the front panel display.
2
SYSTEM Press SYSTEM MENU.
MENU
3
Press X/x repeatedly until
"ATTENUATE" appears in the front
panel display, then press
4
Press X/x to select a setting.
The default setting is underlined.
• "ATT ON": attenuates the input level.
• "ATT OFF": normal input level.
5
Press
The setting is made.
6
Press SYSTEM MENU.
The system menu turns off.
The output level is changed.
.
or c.
39
US