Sony DAV-HDX500 Operating Instructions Manual page 25

LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
5
Press X/x to select a language.
The system displays the menu and subtitles
in the selected language.
6
Press .
The Setup Display for selecting the aspect
ratio of the TV to be connected appears.
SCREEN SETUP
TV TYPE:
YC C /RGB (HDMI):
B R
SCREEN SAVER:
BACKGROUND:
BLACK LEVEL:
BLACK LEVEL
(COMPONENT OUT)
4:3 OUTPUT:
7
Press X/x to select the setting that
matches your TV type.
x If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
[16:9] (page 88)
x If you have a 4:3 standard TV
[4:3 LETTER BOX] or [4:3 PAN SCAN]
(page 88)
8
Press .
The Setup Display for selecting the speaker
formation appears.
9
Press C/c to select the speaker
formation image as the speakers are
actually positioned.
For details, see "Getting Optimal Surround
Sound for a Room" (page 82).
SPEAKER FORMATION
STANDARD
ENGLISH
ENGLISH
FRENCH
SPANISH
PORTUGUESE
16:9
16:9
4:3 LETTER BOX
4:3 PAN SCAN
ON
:
OFF
FULL
Note
• When the wireless kit WAHT-SD1 (supplied
with DAV-HDX501W only) is installed,
[STANDARD (WIRELESS)] appears instead.
10
Press .
11
Connect the calibration mic to the
A.CAL MIC jack on the front panel and
press X/x to select [YES].
Set up the calibration mic at the ear level
using a tripod, etc. (not supplied). The front
of each speaker should face the calibration
mic, and there should be no obstruction
between the speakers and the calibration
mic. Be quiet during the measurement.
AUDIO IN / A.CAL MIC
Calibration mic
continued
25
US