Voxx Electronics Prestige APSPS1 Installation And Reference Manual page 8

Detailed Descriptions: Alarm Override Procedures
Default Alarm Override
The Default Alarm Override procedure will disable the alarm when the remote control is not available or has become
inoperative. If the vehicle door is opened without disarming, the alarm will sound and the vehicle will not start when
attempting to start with the key. To disable the alarm:
1. Turn the vehicle ignition to the ON position 5x, ending in ON.
2. The LED will illuminate solid.
3. Cycle the ignition OFF/ON 1x.
The alarm will silence and the vehicle will now start normally with the key.
Custom Code Override
Unlike the Default Override, Custom Code Override is a user personalized code that offers a higher lever of security. If the
user chooses to use Custom Code Override, Feature Bank 2 ; Feature 9 must be programmed for "Custom Code".
Custom Code Override Procedure
The default Custom Code is "1". To disarm the alarm using the Custom Code option:
1. Cycle the ignition to the ON position 5x, ending in ON.
2. Within 5sec, the LED will Illuminate Solid.
3. Within 5sec, Turn the ignition OFF.
4. The LED will begin to flash.
5. Cycle the ignition ON when the LED flashes the number of times equal to your Custom Code.
Custom Code Programming Procedure
The custom code can be selected from the numbers 1-9. In this example the user chosen Custom Code will be "2". To
enter a new Custom Code you must first confirm the current code.
Step 1: Confirm the current Custom Code.
1. With the alarm disarmed, Cycle the ignition to the ON position 8x, ending in ON.
2. Within 5sec, the LED will Illuminate Solid.
3. Within 5sec, Turn the ignition OFF.
4. The LED will begin to flash.
5. Cycle the ignition ON when the LED flashes the number of times equal to your Custom Code.
Step 2: Set new Custom Code
1. Cycle the ignition to the OFF position. The LED will begin to flash.
2. Cycle the Ignition ON when the LED flashes the number of times equal to the new Custom Code.
The LED will flash to confirm the new Custom Code. Make a note of the new Custom Code. The Custom Code can only be
changed by first entering the current Custom Code.
8
APSPS1_RevA_1/19