Table of Contents
Advertisement
Detailed Descriptions: Setup Options
Security Control (Bank 2) (cont.)
Feature 8: AUX Ch. 3 Output Timing
Function: Set the output timing of the DARK BLUE Aux Ch. 3 Output
•
Option 1 - Output pulses for 1 Second.
•
Option 2 - Output turns ON or OFF with each press of the remote control.
•
Option 3 - Output turns ON and will remain ON until the ignition is cycled to the ON position.
Feature 9: Override Method
Function: Set the Alarm Override Method. This will be used if the remote control is lost or inoperable.
Setting Choices:
•
Option 1 - Alarm Override method is normal.
•
Option 2 - Alarm Override method is set for a Custom Code.
Note:
Refer to Detail Description: Alarm Override and Custom Code Programming procedures on page 8.
Feature 10: Default All Features
Function: Set all features back to the factory configuration.
Setting Choices:
•
Option 1 - System will not Reset.
•
Option 2 - System will Reset all feature back to default.
APPS1_RevA_1/19
See page 10 for Programming Instruction.
7
Advertisement
Table of Contents
