Shock Sensor; Tilt Sensor - Voxx Electronics Prestige APSPS1 Installation And Reference Manual

Detailed Descriptions: Internal Components

Shock Sensor

The shock sensor is integrated onto the module circuit board. The module should be securely attached to a vehicle
surface or sturdy wire harness. Testing takes place after all connections are made and the system is powered up.
Refer to Quick Reference: System Diagnostics on page 11

Tilt Sensor

The Tilt Sensor is integrated onto the module circuit board. The module should be securely attached to a vehicle surface
or sturdy wire harness. The system is programmed to "Zero Out" each time the alarm is armed. Testing takes place after
all connections are made and the system is powered up.
Refer to Quick Reference: Setup Options on page 5
4
for instructions on testing and adjusting the shock sensor.
for instructions on adjusting the tilt sensor.
APSPS1_RevA_1/19