Table of Contents
Advertisement
Detailed Descriptions: Setup Options
Security Control (Bank 2) (cont.)
Feature 3: Tilt Sensor Adjustment
Function: Set the sensitivity of the internal tilt sensor.
Setting Choices:
•
Option 1 - Alarm will trigger with a 1° change in angle.
•
Option 2 - Alarm will trigger with a 5° change in angle.
•
Option 3 - Alarm will trigger with a 15° change in angle.
•
Option 4 - Alarm will trigger with a 30° change in angle.
Feature 4: Silent Mode
Function: Set audible beeps on or off when arming and disarming the system.
Setting Choices:
•
Option 1 - Pressing Arm or Disarm at any time will perform the function with audible beeps.
•
Option 2 - Pressing Arm or Disarm at any time will preform the function without audible beeps.
Feature 5: Security Notification
Function: Set the WHITE/BLACK Output Polarity
Setting Choices:
•
Option 1 - Constant 12-Volt (+) for use with Siren
•
Option 2 - Pulsed Ground (-) for use with Horn
Feature 6: Parking Light Output
Function: Set the Parking Lights to flash with Arm or Disarm
Setting Choices:
•
Option 1 - Parking Lights will Flash with Arm, Disarm, and Alarm Trigger.
•
Option 2 - Parking Lights will flash with Alarm Trigger Only.
Feature 7: Shock Sensor Adjustment
Function: Set the sensitivity of the internal shock sensor. 1 = Low; 8 = High
Setting Choices:
•
Option 1 - Shock Sensor Level 1
•
Option 2 - Shock Sensor Level 2
•
Option 3 - Shock Sensor Level 3
•
Option 4 - Shock Sensor Level 4
•
Option 5 - Shock Sensor Level 5
•
Option 6 - Shock Sensor Level 6
•
Option 7 - Shock Sensor Level 7
•
Option 8 - Shock Sensor Level 8
6
See page 10 for Programming Instruction.
APSPS1_RevA_1/19
Advertisement
Table of Contents
