Sony BDV-EF200 Operating Instructions Manual page 17

When the component does not have an HDMI OUT jack
Connect the system so that video signals from the system and other component are sent to the TV, and
audio signals from the component are sent to the system as follows.
TV
System
If the component plays sound only, connect the audio output of the component to the system.
Rear panel of the unit
: Signal flow
• If you make connection above, set [Control for HDMI] in [HDMI Settings] of [System Settings] to [Off] (page 49).
• You can enjoy component sound by selecting the "AUDIO" function (page 22).
Video out
Component
Audio out
L
AUDIO IN
R
AUDIO
Red
White
Audio cord (not supplied)
Red
White
To the audio out jacks of the VCR, digital
satellite receiver, PlayStation, or portable
L R
audio source, etc.
AUDIO OUT
Signal flow
: Video signal
: Audio signal
17
GB