Advertisement
2.3 "Option 4" control unit
The runtime system of the VKA-110 is based on Windows CE 5.0. It starts automatically
when the main switch (Q1) is turned to ON.
The "Option 4" control unit standard package comprises the following functionalities:
Evaluation of short-time test data at 0.1-second intervals
Weld point tests at rotational speeds of up to 6000 r/min
Motor torque display (numerical and graphic display)
Step control (freely programmable testing process)
Switch-off parameters: time or number of revolutions
Changing the rotational speed during the runtime
Automatic calibration of the rotational speeds
WebVisu + web interface (external operating option via PC, Ethernet interface)
FTP server (measuring data can be retrieved directly from a USB interface)
USB and Ethernet interface to evaluate data (e.g. in Excel)
The following additional options are available for the VKA-110 control unit:
Temperature display
Torque display for various ball cups
Test force display (assembly, see 5.4.4)
Vibration sensor
Additional options 1 - 3 are displayed numerically and graphically.
Additional option 4, vibration sensor, is displayed numerically.
The test data are transmitted via Ethernet or USB interface for evaluation in Excel.
Setting up the tester:
The VKA-110 comes default-configured.
You will only need to configure the network settings under the "end PLC" option if you
want to use the network functions of the VKA control unit.
Go to the Windows start menu, click on "Programs" and then "Control Panel".
Enter the settings in "Network".
Disconnect from the network before you start the VKA-110.
Connect the network cables only after the VKA-110 has been fully powered up to ensure
that your test results will be recorded.
Warning!
The "Option 4" control unit has copy protection.
Any attempt to copy the software will disable the control unit.
9
Advertisement
