Advertisement
2.8 Types of tests
3. Test Description, Page 22
3.1 Types of tests
3.1.1 What to do prior to each test
3.1.2 Standard short-time tests
3.1.3 Long-time tests
3.1.4 Testing materials
3.2 How to perform the tests
3.2.1 Conditions if the loads applied are low
3.2.2 Conditions if the loads applied are high
3.2.2.1 The wear scar diameter
3.2.2.2 The 2.5-second wear and tear delay time
3.2.3 Conditions if the loads applied are extremely high
4. Maintenance, Page 29
4.1 Spindle bearing
4.2 Ball holder
4.3 Standard ball cup and temperature-adjustable ball cup
4.4 Cutter holder
5. Installation, Page 30
5.1 Choosing a location
5.2 Floor requirements
5.3 Space requirements
5.4 Mechanical installation
3
Advertisement
