Advertisement
2.5 Mounting additional weights
If you mount additional weights, the load range will be increased.
To mount them, push them onto the 10kg jockey weight (pos. 30). Use a fixing screw to
fasten and/or position the additional weights (pos. 15).
The following additional weights are available:
40kg additional weight consisting of 4 rings (each ring weighs 10kg);
40kg additional weight with grab handles to move it
Note: When you unscrew the fixing screw, you must remove it far enough out of the test
weight to avoid damage to the test weight.
You can find the relevant load sequences on a separate sheet supplied together with the
VKA-110 documentation.
Information about the test weights:
For control purposes note that the jockey weights including indexing lever and all rings of
the additional weights with screws as well as the 40kg additional weight including grab
handles have been manufactured to the weight stated (tolerance = 0.5%).
17
Advertisement
