Chapter 1 - Introduction; How To Use This Manual - ABB ACH 500 Series Programming Manual

How To Use This
Manual
ACH 500 Programming Manual
This chapter describes the purpose and contents of this manual, describes the
intended audience, explains conventions used in this manual, and lists related
publications.
The purpose of this manual is to provide you with the information necessary
to select, modify, and apply Application macros to the operation of your ACH
500 drive.
ACH 500 user documentation also includes either the ACH 501 Installation &
Start-up Manual or the ACH 502 Installation & Start-up Manual, which is
included with the drive.
Chapter 1 – Introduction, the chapter you are reading now, introduces you to
the ACH 500 Adjustable Frequency AC Drives Programming Manual
Including Application Macros and conventions used throughout the manual.
Chapter 2 – Overview of ACH 500 Programming provides an overview of
Application macros and describes how to use the menu system of parameters
to select and modify the macros.
Chapter 3 – Start-up Data lists and explains the Start-up Data parameters.
This chapter also describes how to set the Start-up Data parameters.
Chapter 4 – Control Operation describes Operating Data parameters, keypad
references, drive-mounted and external controls, setting parameters for your
specific drive application, and protecting your drive parameters from
unauthorized changes.
Chapter 5 – Standard Application Macro Programs defines Application
macros in terms of parameter settings. This chapter also describes the
operation and application suitability of four standard Application macros and
the User macro.
Chapter 6 – Parameters lists the ACH 500 parameters and explains the
functions of each parameters.
Appendix A – Complete Parameter Settings lists, in a table form, all parameter
settings for the ACH 500.
Appendix B – Programming Digital Inputs lists, in table form, parameter
values and digital I/O configurations.
Index helps you locate the page numbers of topics contained in this manual.
Chapter 1 – Introduction
1-1