Partial Scan Operation - Sony XCD-SX910CR, XCD-SX710CR, XCD-SX910UV, XCD-SX910, XCD-SX710 Technical Manual

Partial Scan Operation

Partial scan can be set using either the SettingBit or
IIDC v.1.20 interchange.
An example of the setting procedure (In the case of an
XCD-SX910CR/SX910UV/SX910)
960
Set the format.
Check available modes.
Set the mode.
Obtain a CSR offset address.
Go to Step 2.
XCD-SX910CR/X710CR
XCD-SX910UV
XCD-SX910/X710
1280
240
320
640
Start
When shooting the center of the whole
screen with the screen size of 640 ×
480
480, and color coding set to 8 bit Black
& White Mode, the packet size is set to
maximum in order to capture the
image at the highest speed.
Write E0000000h in F0F00608h.
(Set the format to 7.)
Read F0F0019Ch. F8000000h is
returned, thus Mode0 to Mode4 are
available.
Write 00000000h in F0F00604h.
(Set the Mode to 0.)
Read F0F002E0h. 003C4000h is
returned, thus the offset address for
Mode0 is F0F10000h. (F0000000h
+4*003C4000h)
Control
26