Frame Rate Settings For Format 7; 16-Bit Mode; 1394 Bus Synchronization; Exposureout - Sony XCD-SX910CR, XCD-SX710CR, XCD-SX910UV, XCD-SX910, XCD-SX710 Technical Manual

Digital video camera module
Hide thumbs Also See for XCD-SX910CR, XCD-SX710CR, XCD-SX910UV, XCD-SX910, XCD-SX710:
Table of Contents

Advertisement

Frame Rate Settings
for Format 7
For Format 7, the offset address 600h frame rate
settings are disabled, but with this camera, the frame
rates for Modes 1 to 4 are determined by the packet
size.
XCD-SX910CR/SX910UV/SX910 XCD-X710CR/X710
Format7
Frame
rate
30
Mono8
15
Mode1
15
Mono16
7.5
30
Mono8
15
Mode2
15
Mono16
7.5
15
Mono8
7.5
Mode3
7.5
Mono16
3.75
15
Mono8
7.5
Mode4
7.5
Mono16
3.75

16-bit Mode

The camera supports 16-bit Black & white
(Monochrome) mode, but because the output of the AD
converter is 10-bit, only the least significant 10 bits of
the 16 bits will handle data. The upper 6 bits will be
filled with zeros.
000000dd | dddddddd
XCD-SX910CR/X710CR
XCD-SX910UV
XCD-SX910/X710
Packet
Frame
Packet
size
rate
size
1280
50
1536
640
25
768
1280
25
1536
640
12.5
768
2560
50
3072
1280
25
1536
2560
25
3072
1280
12.5
1536
2752
1376
2752
1376
2048
1024
2048
1024
1394 Bus
Synchronization
Timing used to start exposure is synchronized with the
1394 bus time cycle register.
If cameras are connected in a bus connection, they are
automatically synchronized in a 1394 bus operation.
As 400 Mbps frequency area restriction can affect the
synchronization, you must set the video mode in which
the cameras can transmit video signal at the same time.
1394 synchronization does not work in long exposure
mode. In a long exposure, the exposure time is set
longer than the image transmission cycle.
CPU operation timing can cause jitter in 1394 bus
synchronization. (Approx. 4 µ sec)
Hardware external synchronization will ensure further
accuracy.

ExposureOut

When trigger is OFF, or software trigger is ON, a
signal that indicates the exposure time is output from
the BNC connector of the camera.
exposure
time
The LOW period that is given by an output wave form
is an approximate guideline. It does not correspond
exactly to the actual exposure time.
Functions
+5 V
1 kΩ
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents