Card Number Inquiry; Sensor Monitor Input Port Setting - Union Community Virdi AC-2100 User Manual

AC-2100 User Guide
< >
Open Door
1.Yes
2.No
[ESC][↑][↓][ENT]
※ To use this function, "Allow administrator access" item must be
checked in the terminal option of the server program.
After selecting a setting value, press [ENT] button to move to the upper menu.

3.7.2. Card Number Inquiry

◆ At default screen [F3~]  [5. Ext Function]  [2.Read Card No.] ◆
Place Your Card
[ESC]
This is an additional function that is not related to the environment setting of
the terminal. A terminal with card reader can read a card number to allow card
registration at the server. If a card is placed while this screen is displayed, the
card number is displayed on the LCD screen.
Press [ESC] button to leave from the card reading menu and move to the upper
menu.

3.7.3. Sensor Monitor Input Port Setting

3.7.3.1. Sensor Monitor 1 Input Port Setting
This function sends an alarm message to the server by detecting fire or heat
through the detection sensors connected to the input port of the terminal.
◆ At default screen [F3~]  [5. Ext Function]  [3.Sensor Monitor] ◆
<Sensor Monitor1>
0.None
1.Normal Open
2.Normal Close
[ESC][↑][↓][ENT]
If it is set to '1' or '2', state information is sent to the server when the state
UNIONCOMMUNITY Co., Ltd. / 3F Hyundai Topix Bldg. 44-3 Bangi-dong Songpa-gu
Seoul, Korea (138-050)
Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr
http://www.unioncomm.co.kr
If '1.Yes' is selected, the door opens.
Default setting '0': Port state is not checked.
'1': If port state becomes 1, state information
is sent to the server.
'2': If port state becomes 0, state information
is sent to the server.
47