Union Community Virdi AC-2100 User Manual page 32

AC-2100 User Guide
◆ At default screen [F3~]  [2.Network]  [2.IP Address] ◆
3.4.2.1. Connection Type Setting
<Network Type>
0: Static
1:DHCP
[ESC] [↑] [↓][ENT]
This item selects a type for connecting a terminal to a server. The default value
is '0' (Static IP).
Select [0] if a static IP is acquired from the connected server and [1] if a
dynamic IP is acquired from the DHCP server existing in the network.
After carefully entering the input value, press [ENT] button to continue setting.
※ If the connection type is set as static IP (0), the following 3.4.2.2. IP address,
3.4.2.3. Subnet mask and 3.4.2.4. Gateway need to be set. However, a
dynamic IP does not require these setting processes.
3.4.2.2. IP Address Setting
<IP Address>
192.168.000.003
[←] [↑] [↓] [→]
IP address assigned to the terminal is set.
After carefully entering the value, press down [F4] button for a longer period of
time to continue setting.
3.4.2.3. Subnet Mask Setting
<Subnet Mask>
255.255.255.000
[←] [↑] [↓] [→]
The subnet mask of the network which the terminal is connected to is set.
After carefully entering the value, press down [F4] button for a longer period of
time to continue setting.
UNIONCOMMUNITY Co., Ltd. / 3F Hyundai Topix Bldg. 44-3 Bangi-dong Songpa-gu
Seoul, Korea (138-050)
Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr
http://www.unioncomm.co.kr
Select [0] to acquire static IP and [1] to acquire
dynamic IP.
After moving to the position of a digit to
change using [←][→] button, change the
value using [↑][↓] button.
After moving to the position of a digit to
change using [←][→] button, change the
value using [↑][↓] button.
32