Door Setting - Union Community Virdi AC-2100 User Manual

AC-2100 User Guide
[ENT]  [ENT] ◆
<Blocking Time>
(0~86400):00000
[ESC][↑][↓][ENT]
This function prevents a same user from getting authenticated again within a
certain time. If the value is set for '0', there is no use but if it is greater than
'0', the re-authentication will be permitted only after the time.
After selecting a setting value, press [ENT] button to finish authentication
method setting and move to the upper menu.

3.5.3. Door Setting

If [3.Option] is selected at the main menu, the following screen is displayed.
1. Application
2.
Verify Option
3.
Set Doorlock
4.
Sound Control
5. LCD Setting
6. Time Setting
[ESC][↑][↓][ENT]
3.5.3.1. Door Open Duration Setting
◆ At default screen [F3~]  [3.Option]  [3.Set Doorlock] ◆
<Open Duration>
(00-30):03
[←] [↑] [↓] [→]
This option sets the duration of time until the door is locked again after the
door is opened through authentication success in the terminal. Strike type
represents a time when the door is locked again automatically after the door
is opened through authentication success. In case of dead bolt type and
automatic door, the door operates regardless of these setting values.
'
If it is set to '00', door control is not possible. Use '00' setting only when the
UNIONCOMMUNITY Co., Ltd. / 3F Hyundai Topix Bldg. 44-3 Bangi-dong Songpa-gu
Seoul, Korea (138-050)
Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr
http://www.unioncomm.co.kr
Default setting: 00000 (Unit: Second)
Select [3.Set Doorlock] for door setting.
Default setting: '03' (Unit: Second)
39