Server Ip Setting - Union Community Virdi AC-2100 User Manual

AC-2100 User Guide
3.4.2.4. Gateway Setting
< Gateway >
192.168.000.001
[←] [↑] [↓] [→]
The gateway IP address of the network which the terminal is connected to is
entered.
After carefully entering the value, press down [F4] button for a longer period of
time to continue setting.

3.4.3. Server IP Setting

◆ At default screen [F3~] [2.Network]  [3.Server IP] ◆
3.4.3.1. Server IP Setting
< Server IP >
192.168.000.002
[←] [↑] [↓] [→]
The IP address of the network server which the terminal is connected to is
designated.
After carefully entering the value, press [F4] button for a longer period of time
to continue setting.
3.4.3.2. Server Port Setting
< Server Port >
Num : 9870
[←] [↑] [↓] [→]
This is an item that enters the port of the authentication server. The default port
value of the authentication server is '9870'. Note that if this value is changed,
the value at the server program must also be changed.
After carefully entering the value, press down [F4] button for a longer period of
UNIONCOMMUNITY Co., Ltd. / 3F Hyundai Topix Bldg. 44-3 Bangi-dong Songpa-gu
Seoul, Korea (138-050)
Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr
http://www.unioncomm.co.kr
After moving to the position of a digit to
change using [←][→] button, change the
value using [↑][↓] button.
After moving to the position of a digit to
change using [←][→] button, change the
value using [↑][↓] button.
After moving to the position of a digit to
change using [←][→] button, change the
value using [↑][↓] button.
33