Updating The Unit's Firmware Automatically - Yamaha YAS-209 Owner's Manual

Updating the unit's firmware
automatically
The unit checks for firmware updates at the same time every day, and
automatically installs any it finds. When the firmware has been updated,
updated content is displayed on the Sound Bar Controller app the next
time the app is opened.
Updating the firmware adds new features to the unit or otherwise
improves the product. For details, see the product information page on
the Yamaha website.
• Product information page > Support (Download) > Firmware/Software
n NOTICE
• Do not operate the unit or disconnect the power cord or network cable while the
firmware is being updated.
n NOTE
The following conditions must be met in order for firmware to be updated automatically.
• The network standby function or voice control ready function is enabled. For details,
see the following:
– "Enabling/disabling the network standby function" (p.40)
– "Operating the unit using voice commands (Amazon Alexa)" (p.25)
• The unit is connected to a network.
• The unit is turned off before 2:00 a.m.
Pairing the center unit and subwoofer
manually
The center unit and subwoofer are automatically connected via wireless
connection the first time the unit is turned on. If the center unit and
subwoofer are not properly connected due to a temporary
communications failure, pair the center unit and subwoofer manually.
n NOTE
Pairing is the process of having the center unit and subwoofer recognize one another as
connection destinations.
1
Turn off the unit.
2
Press and hold SUBWOOFER (-) for at least five
seconds.
The center unit is turned on and the HDMI indicator flashes.
SUBWOOFER
42
En
Flashes