Configuring Hdmi Audio Output - Yamaha YAS-209 Owner's Manual

Configuring HDMI audio output

Select the device from which audio input via the unit's HDMI IN jack will
be played when the HDMI control function is disabled. HDMI audio is
output from this unit by default.
The unit (default) Play HDMI audio input signal from the unit.
TV Play HDMI audio input signal from the TV.
1
Turn off the unit.
2
Press and hold 3D SURROUND for at least five
seconds.
The HDMI audio output setting is changed.
3D SURROUND
Once the indicator has shown the HDMI audio output setting
applied to the unit as follows, the unit will turn on.
Glows (audio is played from the unit)
Off (audio is played from the TV)
n NOTE
• When playing back HDMI audio input signal from the TV, the unit cannot be used to
adjust volume. Use TV controls to adjust volume.
• For details on the HDMI control function, see the following:
– "Configuring the HDMI control function" (p.36)
• To configure HDMI audio output with the HDMI control function enabled, select the
audio output device on the TV connected to the unit.
• HDMI video signals input to the HDMI IN jack of this unit are always output from the
HDMI OUT (ARC) jack of the unit.
37
En