Table of Contents
Advertisement
The adjustment is thus completed and the thermostat returns to normal operation.
It is possible to exit the degrees Celsius/Fahrenheit adjustment mode at any time :
• By pressing down the
button.
• By not pressing down any buttons during 1 minute.
In any case, the adjustment is saved.
Manual mode (
)
From the Manual mode, you can manually adjust the thermostat set point by pressing
down the
or
button to increase the value, or to decrease it. To quickly scroll
through the set point values, press and hold down the button. The standard factory
set point adjustment is 21°C. From this mode, the screen displays the temperature,
the heating power used, the hour and the day of the week.
Automatic mode (
)
From the Automatic mode, the thermostat adjusts the set points according to the
programmed periods. If no data was entered, the thermostat acts the same way
as from the Manual mode and the standard factory set point adjustment is 21°C.
It is always possible to manually adjust the set point using the
or
button. The
selected set point will be effective until one period is programmed, which represents
an hour and a day of the week. Note that if the set point is lowered to off (--.-), the
programming will not be effective. It is possible to program 4 periods a day during
the week and 4 periods a day during the weekend, which means that the set point can
change automatically up to 4 times a day. The period order is not important.
From this mode, the screen displays the temperature, the heating power used, the
hour, the day of the week and the current programmed period number (
to
;
displayed on the right-hand side of the hour).
9
Hide quick links:
Advertisement
Table of Contents
