White Rodgers BP150 Installation Instructions & User Manual page 19

4. L___ is displayed instead of the hours and the adjustment of the minimum set
point flashes. Press down the
temperature. The adjustment can range from --.- (Heating off) to 30°C by intervals
of 0.5°C (or 86°F by intervals of 1°F). Press down the
selection.
5. H___ is displayed instead of the hours and the adjustment of the maximum set
point flashes. Press down the
temperature. The adjustment will be between the minimum set point previously
selected and 30°C by intervals of 0.5°C (or 86°F by intervals of 1°F). Press down the
button to confirm your selection.
The activation of the Security mode is thus completed and the thermostat returns to
normal operation.
It is possible to exit the Security mode adjustment at any time :
• By pressing down the
• By not pressing down any buttons during 1 minute.
Note: if the adjustment of minimum and maximum set points is not completed, Security
mode will not be activated.
Procedures to deactivate the Security mode
1. To deactivate the Security mode, start by cutting off the thermostat power at
circuit breaker and wait at least 30 seconds.
2. Turn the thermostat power back on and the
minutes.
3. Press down the
options appear and °C or °F icon flashes.
16
or
or
button.
button for 3 seconds and release it. The various icons and
button to adjust the minimum set point
button to adjust the maximum set point
icon will blink for a maximum of 5
button to confirm your