Table of Contents
Advertisement
At the end of the programming period 4 of the weekend, the programming is
completed and the thermostat returns to normal operation.
It is possible to exit the Automatic mode's programming at any time :
• By pressing down the
• By not pressing down any buttons during 1 minute.
In any case, all programming is saved.
Erasing of the programming
When programming the Automatic mode, it is possible to delete a programming
period.
1. Enter into the programming of the Automatic mode and reach the period, as
described in the previous section.
2. When the period is displayed, simultaneously press down the
to erase the programming. The time of the period displays --:-- and the set point
displays --.- to indicate that the programming is erased.
3. Then, exit the programming mode as described in the previous section.
button.
and
buttons
11
Hide quick links:
Advertisement
Table of Contents
