Anticipated Start - White Rodgers BP150 Installation Instructions & User Manual

Anticipated start

This mode enables the room to reach the selected temperature at the programmed
hour. In fact, the thermostat estimates the delay required to reach the set point of
the next period at the programmed hour. This delay is obtained by the observation of
the temperature variations in the room and the results obtained during the preceding
anticipated starts. That way, the results should be increasingly precise day after day.
The icon will blink when the anticipated start of the next period will begin.
If the set point is changed manually when this mode is in progress, the anticipated start of
the next period is canceled.
To activate or deactivate the anticipated start :
1. In any mode (Manual, Automatic or Preprogrammed), out of any adjustment
mode, press down the
and options appear and °C or °F icon flashes.
2. Press down the
down the
3. All icons disappear except the
button to activate or deactivate the Anticipated start (indicated by the icon that
turns on or off). Press down the
The adjustment is thus completed and the thermostat returns to normal operation.
It is possible to exit the Anticipated start adjustment mode at any time :
• By pressing down the
• By not pressing down any buttons during 1 minute.
In any case, the adjustment is saved.
14
button for 3 seconds and release it. The various icons
or button to select the
button to confirm your choice.
button.
icon (indicated by its flashing). Press
con that continues to flash. Press down the
button to confirm your choice.
or