Table of Contents
Advertisement
PA 7400
6
INSTALLATION
IMPORTANT!
If you want to install simultaneously several ADDI-DATA boards,
consider the following procedure.
•
Install and configure the boards one after the other.
You will thus avoid configuration errors.
1. Switch off the PC
2. Install the first board
3. Start the PC
4. Install the software (once is enough)
5. Configure the board
6. Switch off the PC
7. Install the second board
8. Start the PC
9. Configure the board
etc
You will find additional information to these different steps in the sections 6.1 to
6.5.
IMPORTANT!
You have installed already one or more ADDI-DATA boards in your
computer, and you wish to install an additional board?
Proceed as if you wished to install one single board.
20
Technical description
Chapter 6
Advertisement
Table of Contents
Need help?
Do you have a question about the ADDICOM PA 7400 Series and is the answer not in the manual?