Since 1988 we have consistently followed a Hike & Fly harness. our own plans and ideas for both develop- We hope that the EASINESS 3 will bring ment and production. you many enjoyable hours in the air. Larger Legpads, an ergonomically shaped...
Page 3
Reserve handle with connected four flap cked by the retailer before delivery for inner container complete package contents and correct Dummy closure cable basic settings. In the EASINESS 3 delivery Optional package: Backside-Cover for flying without Ready-mounted, EN/LTF certified ...
Page 4
Features in Details Harness: Edelrid FORAS carabiners Back pocket Cord for bag volume reduction Drink tube opening V-Connection channel with zip Detachable airbag-protector Reserve compartment in airbag EASY CONNECT System 2-buckle closure system Longer legpads Magnet for holding the speed loop Double-sided pockets you can reach when flying or carrying Airbag air intakes...
Page 5
Rucksack: Adjustable, stretchy helmet holder Shoulder straps Removable waist strap Chest strap – adjustable in height and width Elastic pocket on the back Ice axe and hiking pole stowage Side pocket Double-sided pockets you can reach when flying or carrying Drink tube opening...
Page 6
Airbag with Reserve Container The EASINESS 3 comes with an al- ready-mounted LTF certified Airbag- Protector. The reserve compartment is built into the Airbag-Protector. The Airbag- Protector also functions fully when a re- serve is not installed. In this case the re-...
Page 7
Backside-Cover If the “Without Airbag” purchase option has been chosen, the EASINESS 3 will be delivered with a Backside-Cover already fitted. Removing the Backside-Cover To remove the Backside-Cover undo the two zips which start behind the left shoulder strap, then unloop the six toggles .
Adjusting the Harness The EASINESS 3 is easy to adjust, with 3. Small chest strap just a few simple settings. Put the harness The small chest strap holds the shoulder on, close the front strap, hang the straps in the best place for takeoff and lan- EASINESS 3 by both carabiners in a har- ding.
Page 10
– your safety de- case a personal test release (compatibility pends on it! The EASINESS 3 manual ex- test) is the only way to make sure that a plains the steps required in detail. Make...
Page 11
Reversing and Packing Thoughtful and careful packing will definite- ly prolong the life of the Airbag-Protector. Reverse the rucksack, fold the legpads in and put the airbag flat on top. Make sure that its shaping wires are not kinked, and follow their natural curves.
The EASY CONNECT System makes clip- ping an ADVANCE paraglider to the harness quite straightforward. Make sure that the red and blue lines on the EASINESS 3 support loops agree with the red and blue lines on the paraglider risers. Carabiner locators make sure that the FORAS carabiners re- main in place in the harness support loops.
Need help?
Do you have a question about the Easiness 3 and is the answer not in the manual?
Questions and answers