Preparing The Power Supply - Sony FD Mavica MVC-FD200 Operating Instructions Manual

Preparing the power supply

Installing the battery pack
Your camera operates only with the NP-F330 (supplied)/F550 (optional)
"InfoLITHIUM" battery pack* (L series). See page 86 for more information about
"InfoLITHIUM" battery pack.
1
1
2
1 Open the battery cover.
Slide the battery cover in the direction of the arrow.
Install the battery pack.
2
Press and hold the battery eject lever and then insert the battery pack with the
mark facing toward the battery compartment.
3
Close the battery cover.
To remove the battery pack
Open the battery cover. Slide the battery eject lever rightward, and remove the
battery pack.
Be careful not to drop the battery pack when removing it.
* What is "InfoLITHIUM"?
"InfoLITHIUM" is a lithium ion battery pack which can exchange information such as battery
consumption with compatible video equipment. "InfoLITHIUM" L series battery packs have the
mark. "InfoLITHIUM" is a trademark of Sony Corporation.
2
Battery eject lever
3 2
1
Battery
eject lever
v
9