Symptom
The moving image breaks
off when you play back an
image on a computer.
Your camera cannot delete
an image.
The power turns off
suddenly.
The image does not
appear on the TV screen.
The slide show function
stops automatically.
You cannot use the
PROGRAM AE function.
The macro function does
not work.
90
Cause and/or Solution
• You are playing back the file from the floppy disk
or the "Memory Stick."
t
Copy the file to the hard disk of the computer
and then play back the file from the hard disk
(page 32).
• The image is protected.
t
Cancel the protection (page 74).
• With the PLAY/STILL/MOVIE selector set to
STILL or MOVIE, if you do not operate the camera
for about three minutes while the power is on, the
camera turns off automatically to prevent wearing
down the battery pack.
t
Turn on the camera.
• The battery pack is discharged.
t
Replace it with a fully charged battery pack.
• The VIDEO OUT setting of your camera is
incorrect.
t
Change the setting (page 55).
• The slide show function stops after about
20 minutes when using a floppy disk.
t
To continue the slide show, select [START]
again (page 72).
• Your camera is set to TEXT mode or the PLAY/
STILL/MOVIE selector is set to MOVIE.
t
Set the PLAY/STILL/MOVIE selector to STILL
and change the setting (pages 53, 54).
• PROGRAM AE is set to the Panfocus mode.
t
Cancel the Panfocus mode (page 65).