Sony FD Mavica MVC-FD200 Operating Instructions Manual page 89

Symptom
You cannot display a print
mark.
The picture is noisy.
The picture is too dark.
The flash does not work.
The date and time are
recorded incorrectly.
Vertical streaks appear
when you are shooting a
very bright subject.
The zoom does not work.
Digital zoom does not
work.
The image is in
monochrome.
The image cannot be
played back on a
computer.
Cause and/or Solution
• You cannot display print marks on moving images,
text images and Clip Motion images.
• Your camera is placed near a TV or other
equipment that uses strong magnets.
t
Move your camera away from the TV, etc.
• You are shooting a subject with a light source
behind the subject.
t
Adjust the exposure (page 67).
• The brightness of the LCD screen is too low.
t
Adjust the brightness of the LCD screen
(page 20).
• The flash is set to
t
Set the flash to (no indication),
(page 22).
• The camera is in one of the following PROGRAM
AE modes: Twilight, Twilight plus, or Landscape.
t
Cancel the PROGRAM AE function or set the
flash to (pages 22, 65).
• The PLAY/STILL/MOVIE selector is set to
MOVIE.
t
Set it to STILL.
• The date and time are not set correctly.
t
Set the correct date and time (page 14).
• This is called the smear phenomenon.
t
This is not a malfunction.
• PROGRAM AE is set to the Panfocus mode.
t
Cancel the Panfocus mode (page 65).
• You cannot use digital zoom when recording
moving pictures.
• Digital zoom is set to [OFF].
t
Set digital zoom to [ON] at the menu.
• You shot the image in TEXT mode.
t
Cancel the TEXT mode (page 62).
• The picture effect is set to B&W.
t
Cancel the B&W mode (page 69).
t
Consult the computer or software manufacturer.
.
, or
89