Charging The Battery Pack - Sony FD Mavica MVC-FD200 Operating Instructions Manual

Charging the battery pack

When the camera is turned on, you cannot charge the battery pack. Be sure to turn off
the power of the camera.
1
Battery pack
1 Insert the battery pack into your camera.
Open the DC IN cover and connect the AC power adaptor to the DC
2
IN jack of your camera with the
Connect the power cord (mains lead) to the AC power adaptor and
3
then to a wall outlet (wall socket).
The POWER ON/OFF (CHG) lamp (orange) on the right of the LCD screen
lights up when charging begins. When the POWER ON/OFF (CHG) lamp goes
off, full charge is completed.
After charging the battery pack
Disconnect the AC power adaptor from the DC IN jack on your camera.
Battery remaining indicator
The LCD screen on the camera shows the remaining time for which you can still
record or play back images.
This indication may not be entirely accurate depending on the conditions of use and
the operating environment.
We recommend charging the battery pack in an ambient temperature of between
10°C to 30°C (50°F to 86°F).
10
To DC IN jack
2
To a wall outlet (wall socket)
v
mark facing up.
AC-L10A/L10B
AC power adaptor
Power cord
(mains lead)
3