R Healthcare Dash Series Technical Information Manual page 52

Part number
Various
Where used
Various
Tools and Techniques
Damaged or worn, components need to be replaced, if assembled in pairs R Healthcare
recommends replace both assemblies, for continuity of wheelchair in use.
Fitting
1 Turn Tray (1) upside down and secure pivot mounting bracket (2) to the tray using screw (3) washers (4,5) into
pre-drilled holes (using holes that suit the chair width)
2 Remove armrests from chair, loosen arm pad screws from armrest and remove.
3 Take universal tray bracket (11) and attach to underside of armrest on the outside, securing with screw (14)
and washer (15) through slotted hole in plate (13) through armrest frame and into arm pad.
4 Replace armrests on chair
5 Fit tray into universal bracket by securing pivot mounting bracket (2) into front tube of universal bracket (11)
6 Secure using thumb screw (10)
7 For extra security use Velcro strap (8) to secure tray to rear of armrest.
Check
1 Apply pressure to tray to ensure it is secure.
Spares and Options should only be fitted by a trained and competent person
www.rhealthcare.co.uk
Post code S41 8NJ
Weight excluding packaging: 1 kg per wheelchair excluding tray fittings
R Healthcare Technical Information Manual - Dash
Fitting Instruction – Tray
Page 52 March 2007 Revision B