Table of Contents
Advertisement
Fitting Instruction – Armrest Assembly both long and short, left and right handed
Part number
Various
Where used
Various
Tools and Techniques
The following tools will be required;
None
Service and maintenance check
At each service check for:
Side panels for any signs of damage
Armrest pads for damage, contamination
Secure location into front and rear armrest pivot mouldings
Damaged or worn, components need to be replaced, if assembled in pairs R Healthcare recommends replace both
Method
39. Remove existing armrest assembly
Turn armrest locking lever front and back to unlocked position.
Remove armrest from front and back mouldings.
Armrest replacement
Using new stock, insert armrest assembly into rear pivot moulding, using locking lever to lock into position.
Pivot armrest towards the front of the chair to locate and locate front spigot moulding into available socket, on the side
frame moulding, ensuring the 1/4rt turn latch operates correctly.
40. Replacement Armrest check
Pull armrest upwards to ensure it is locked into position.
www.rhealthcare.co.uk
Post code S41 8NJ
Weight excluding packaging: Short: 782 grams LONG: 763 grams per armrest assembly.
R Healthcare Technical Information Manual - Dash
assemblies, for continuity of wheelchair in use.
Spares and Options should only be fitted by a trained and competent person
Page 51
March 2007 Revision B
Advertisement
Table of Contents
