R Healthcare Dash Series Technical Information Manual page 36

Part number
Various
Where used
Various
Tools and Techniques
The following tool will be required;
No 3 Pozidrive Screw driver.
Torque Spanner with 3mm Pozidrive fitment
Service and maintenance
At each service check for:

Damaged or badly worn hand rims

Loose fitting hand rims

Loose or flaking paint, which may cause sharp edges.
Damaged or worn, components need to be replaced, if assembled in pairs R Healthcare recommends
Method
24. Using the No 3 Pozidrive Screwdriver remove the screws that lock the hand-rim on to the wheel.
25. Discard the old hand-rim and its fixings.
26. Replace the handrim, locating it using the 6 new plastic spacers and screws, through the fixing points that are
attached to the wheel-rim, to 7nm using Torque spanner.
27. Ensure the has no sharp protrusions and is securely fixed to the wheel-rim
Spares and Options should only be fitted by a trained and competent person
www.rhealthcare.co.uk
Post code S41 8NJ
Weight excluding packaging: 0.650 kgs max. per hand rim
R Healthcare Technical Information Manual - Dash
Fitting Instruction – 6 point fixing Handrim
replace both assemblies, for continuity of wheelchair in use.
Page 36 March 2007 Revision B