Table of Contents
Advertisement
Fitting Instruction – footplate and stem assembly
Part number
Various
Where used
Various
Tools and Techniques
The following tools will be required;
Allen key 4mm
Open ended spanner 10mm
Service and maintenance check
At each service check for:
Wear and damage to footplate
Corrosion areas to tube section
Damaged or worn, components need to be replaced, if assembled in pairs Remploy Healthcare recommends
Removal method
Use specified tools to loosen fastening point between stem and parent assembly. Remove fastening .
Remove footplate and stem assembly from parent swinger and discard.
Fitting method
Offer replacement handed footplate and stem assembly to parent swinger, slide up to required height setting
and align holes.
Pick up replacement screw and washer, fit through footrest into footstem, securing footstem at desired height.
Checking method
Ensure footplate and stem assembly does not rotate.
Ensure footplate does not fall under own weight.
Ensure footplate height is set to occupant requirement are symmetrical through centre line of chair.
www.rhealthcare.co.uk
Post code S41 8NJ
Weight excluding packaging:
R Healthcare Technical Information Manual - Dash
replace both assemblies, for continuity of wheelchair in use.
Spares and Options should only be fitted by a trained and competent person
360grams per side
Page 47
March 2007 Revision B
Advertisement
Table of Contents
