Drivecon XT Series Service Manual
  1. Manuals
  2. Brands
  3. Drivecon Manuals
  4. Controller
  5. XT Series
  6. Service manual

Drivecon XT Series Service Manual

Hide thumbs Also See for XT Series:
Table of Contents

Advertisement

Quick Links

Service Manual
Pro2V070
XT SERIES
Service Manual
820 Lakeside Drive – Gurnee, IL 60031
Phone: 1-800- 374-8266
Fax: (847) 855-9650
www.drivecon.com
XT Series rev 5.5B Pro2V070

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XT Series and is the answer not in the manual?

Questions and answers

Related Manuals for Drivecon XT Series

Summary of Contents for Drivecon XT Series

  • Page 1 Service Manual Pro2V070 XT SERIES Service Manual 820 Lakeside Drive – Gurnee, IL 60031 Phone: 1-800- 374-8266 Fax: (847) 855-9650 www.drivecon.com XT Series rev 5.5B Pro2V070...
  • Page 2 13. All the doors and covers must be closed during crane operation. This manual is valid for XT Series revisions 5.5. The release numb er of this document is XT SERIESCSM55BEN. The parameter numbers are based on the software version Pro2V070.

  • Page 3: Table Of Contents

    Inverter ....................... 58 6.1.1 Power supply unit (PSU) ................60 6.1.2 Control unit (CSU) ..................60 Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...
  • Page 4 DC-bus electrolytic capacitors ................86 8.1.1 Re-forming after a long storage period ............86 GENERAL DRAWINGS ....................87 Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 5: General

    Operation: maximum displacement amplitude 3mm at 2 -9Hz. Maximum acceleration amplitude 0.5g (5m/s²) at 9 -200Hz Conforms to LV and EMC directives. Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 6: Type Mark Coding

    Relay with SSU (A,B,C,D,E) 000 XTx TC 0 55 0 Software Revision code The latest revision may differ Special None Varnished boards Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 7: Basic Description

    A great number of other protections included in every XT SERIES are shown in the technical data. Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 8: Main Components

    Speed sensor (P-models) Encoder (N-models) Thermal sensor for motor protection Overload protection device (e.g. Premium) Control devices (switches, pushbuttons, potentiometers etc.) Limit switches Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 9: Functional Description

    – The extended speed range ESR can be used, if the signal FWE (field weakening enabled) is on. Then it is possible to run up to twice the nominal speed depending on the application. Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 10: Control Methods

    AP = 1 AP = 0 AP = 1 DIA3 CMS not CMS not CMS = 0 CMS = 0 DIA4 used used Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...
  • Page 11 XT SERIES to input AIN2+. The speed reference signal of each XT SERIES can also be modified separately by a PLC. Synchronization is activated by parameter selection. Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...
  • Page 12 ? ? when controller is set to a certain step, the speed time controller changes to equal value position down / rev MS -mode Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 13: Mechanical Brake Control

    XT SERIES mod els may include a 3-phase AC-supply for the brake 3-phase AC control. XT SERIES control this line and it is protected by an adjustable circuit breaker. Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 14: Motor Control Modes

    Motor control modes Open loop XT SERIES have a built -in motor model, which calculates - one thousand times in a second - the values of the real motor. The input data needed for the calculation is the instantaneous value of the motor voltage from the ASIC and the measured motor current.

  • Page 15: Emc

    Amendment 11 (2000) for the second environment. Emissions XT SERIES fulfill the emission requirements of the EN 61800-3 A11 2000 for the second environment. Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...
  • Page 16 Immunity level of second environment Safety margin Emission limit of second environment Typical emission Emission limit of of D2H/D2C first environment Frequency Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 17: Installation

    The power losses of XT SERIES are listed in the below table for each power rating. In most cases, XT SERIES models up to 132F do not require any special cooling arrangements as the main part of the losses is fed outside the cubicle in standard installations.
  • Page 18 The overload protection of XT SERIES protects both the supply and the motor cables. The fuses of the supply provide the short circuit protection. Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...
  • Page 19 Note! All control cables must be placed as far from the motor and braking resistor cables as possible. Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 20: Control Wiring

    Extra intermediary terminators cutting the shield are not allowed; the shield should maintain its integrity as much as possible. Spare conductors should be grounded in the both ends. Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 21: Start-Up Procedure

    Write down in the parameter list all the values that have been changed. Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 22: Test Run Without Load

    – Copy all parameters up to keypad memory by parameter S6.3.2. – Save user parameters in Control Unit by parameter B4.1.2. Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 23: Parameter Adjustments

    Move cursor right Decrease values Enter edit mode Warning! Running via keypad can cause a hazardous situation. Keypad control must not be used. Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 24: Navigation On The Control Keypad

    400 V Warning! Changing parameter settings during running may cause a hazardous situation. Parameter settings must not be changed during running. Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 25: Passwords

    Resets whole H8 Fault History when display in any level of H8 menu. reset enter > 1 second Resets whole H8 Fault History when display in sublevel of H8 menu. Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 26: Monitoring

    Motor Current V4.6.30 Calibration Pos V4.21 Motor Speed V4.6.31 Profibus Status V4.22 Output Frequency V4.6.32 Bus Cycle Time G4.23 Multimonitor N4.23.1 Multimonitor Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 27: Input Selections

    Multistep3 P3.2.1.14 Multistep4 P3.2.1.15 Multistep5 P3.2.1.16 PO/MS P3.2.1.17 P3.2.1.18 P3.2.1.19 S11 & S21 P3.2.1.20 P3.2.1.21 P3.2.1.22 MF1 Input P3.2.1.24 MF2 Input Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 28: Speed Supervision Settings

    S2 (normal and ESR). Fault will be detected if the overspeed limit is set over that value. When a fault is detected, the run is prevented. Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...
  • Page 29 S2:4 together with S3 is used for setting the tripping frequency level at ESR speed. If ESR is not used, set S2:4 + S3 equal to S2:1 and S1. Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 30: Functional Test Run For Ssu

    Set rotary switch S1/S3 back to original value. Note! The test makes the crane stop suddenly that may cause a dangerous situation. Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 31: Open Loop Motor Parameter Adjustments

    Pro2V070 Open Loop motor parameter adjustments In hoisting motion the open loop control is available with the XT SERIES. The motors for open loop control always include a suitable speed supervision sensor (sensor bearing or proximity switch). In traveling motion the open loop control is suitable for most of the applications. The applicable minimum speed is 1/3 of the motor rated slip.
  • Page 32 Service Manual Page 31 Pro2V070 Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 33: Open Loop Autotuning For Traveling, Frequency Control

    ? ? A simple multimeter might not be good enough to measure low resistances. Connect the motor and switch power on. Calculate relative value of motor phase impedance. 2217 P3.4.1.4 Voltage Drop P3.4.1.1 Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...
  • Page 34 Service Manual Page 33 Pro2V070 Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 35: Open Loop Manual Tuning For Traveling, Frequency Control

    Check that the motor is without load (no load in the hook). Run on maximum speed and read the current on the keypad display (V4.20). is ready to operate after these adjustments. Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...
  • Page 36 Service Manual Page 35 Pro2V070 Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 37: Closed Loop Motor Parameter Adjustments

    Control Mode Verify the value is 3 (CL Speed Control). Note! Check the operation of limit switches before closed loop tuning. Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 38: Closed Loop Autotuning, Speed Control

    ? ? 0 Normal is the default setting for autotuning. In normal mode inverter stops automatically, when tuning is done in steps 2 and 3. Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...
  • Page 39 Because of speed limitations in step 2 and step 3, tandem drives have to be tuned simultaneous. Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...
  • Page 40 Closed Loop. The adjusted parameters in CL Autotuning are: P3.4.1.5 Nom Flux Curr P3.4.3.5.4 Brk Opening Del P3.4.3.1 Slip Adjust P3.4.3.5.5 St art Magn Time Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...
  • Page 41 ? ? motor set change during tuning After troubleshooting the failure, restart the autotuning from the lowest step that has value Not Done. Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 42: Closed Loop Manual Tuning For Hoisting, Speed Control

    380 V 400 V 415 V 440 V 460 V 480 V 500 V V4.18 Lower Limit Voltage V4.18 Upper Limit Voltage Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...
  • Page 43 XT SERIES is ready to operate after these manual adjustments. If there is any vibration, fine adjustment of speed controller parameters may improve the operation. Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...
  • Page 44 V4.22 V4.20 Motor Voltage Output Frequency Motor Current Speed Controller Record values of P3.4.3.3 P3.4.3.4 Speed Ctrl Kp Speed Ctrl Ti Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 45: Parameter Descriptions

    All Groups are not always listed in control keypad. A sign of + in the front of the group code means that the group is visible in keypad, if the group function is selected. Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...
  • Page 46 G3.5.2 Diagnostic G3.5.3 Bus Control G3.6 Protection G3.7 Laboratory + G3.8 System Bus G3.8.3 Synchronization G3.8.4 Tandem + G3.9 PLC Parameters Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...
  • Page 47 S6.8.3 Software S6.8.4 Applications S6.8.5 Hardware S6.8.6 Expander boards S6.8.7 Debug S6.9 Power Monitor S6.11 Power Multimon. Active Faults Fault History Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...
  • Page 48 0=Not Used 1=Brake Pedal 2=Inching 3=Fault Reset 4=S-CurveInhib 5=Tare 6=Brake Feedb 7=SlackBypass 8=Synchro 9=Brake Pedal2 P3.2.1.24 MF2 Input Same as 3.2.1.1 Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...
  • Page 49 Nom Value Volt P3.2.4.2.4 Aout2 Range 0 = 0-10V Signed 1 = 2-10V Signed 2 = 0-10V Unsign 3 = 2-10V Unsign Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...
  • Page 50 XT CL hoist XT OL hoist Unit PW 3 Description P3.3.9.1 Multistep Logic 0 = MSL 1 = MSH 2 = MSL Alarm Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...
  • Page 51 XT CL hoist XT OL hoist Unit PW 3 Description P3.3.16.1 Joystick Filter 0=Off 1=On P3.3.16.2 Max Filter Range P3.3.16.3 Max Filter Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...
  • Page 52 3 =Automatic G3.4.1.23 Current Control XT OL travel XT CL travel XT CL hoist XT OL hoist Unit PW 4 Description Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...
  • Page 53 CLAutotune1Step1 0 = Not Done 1 = Tuning 2 = Failed 3 = Output Phase 4 = BrakeFailure 5 = Done Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...
  • Page 54 XT CL travel XT CL hoist XT OL hoist Unit PW 4 Description P3.4.4.23.1 Current Ctrl Kp 4000 4000 4000 4000 Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...
  • Page 55 CLAutotune2Step1 0 = Not Done 1 = Tuning 2 = Failed 3 = Output Phase 4 = BrakeFailure 5 = Done Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...
  • Page 56 P3.5.2.2 Process Data 4 Same as 3.5.2.1 P3.5.2.3 Process Data 5 Same as 3.5.2.1 P3.5.2.4 Process Data 6 Same as 3.5.2.1 Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...
  • Page 57 40.0 40.0 40.0 P3.6.12 MTP Motor T P3.6.13 Motor Duty Cycle P3.6.14 Encoder Fault 0 = Not Used 1 = Fault Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...
  • Page 58 PLC Parameters XT OL travel XT CL travel XT CL hoist XT OL hoist Unit PW 3 Description P3.9.1 PLC Parameter 1 Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 59: Components

    The main circuit diagram of D2V002 – D2V005 B+ B- UH_G VH_G WH_G UH_D VH_D WH_D U/T1 V/T2 W/T3 UL_G VL_G WL_G BRK_G UL_D VL_D WL_D BRK_D Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...
  • Page 60 The main circuit diagram of D2V007 – D2V132 UH_G VH_G WH_G UH_D VH_D WH_D U/T1 V/T2 W/T3 VL_G WL_G UL_G BRK_G VL_D WL_D UL_D BRK_D Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 61: Power Supply Unit (Psu)

    0.25Hz is NOT running blinking IEC Application Scheduler 0.5Hz and Application are NOT running Green Status PSU ready PSU not ready Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 62: Basic I/O Board (Slot A)

    DIA5 and OK is 35VAC. 11 12 13 14 15 16 17 18 1 2 3 4 5 6 7 8 9 10 Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 63: Relay / Thermistor Board (Slot B)

    25 26 28 29 6.1.5 SSU Speed Supervision board (Slot C) SSU is always included in CSU slot C with XT SERIES. This is an optional board which can be used in both open and closed loop. D2V-SSU Terminal Signal name...

  • Page 64: I/O Extension Board (Slot D)

    Relay output, 250V 8A, ROE3 normal open ROE3 Blinking Status Yellow 0.25Hz Yellow Board internal fault or communication fault with control unit Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...
  • Page 65 Service Manual Page 64 Pro2V070 YELLOW 25 26 25 26 28 29 Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 66: Profibus Board (Slot E)

    Profibus master Blinking fast Profibus board is activated and receiving messages from the Profibus master Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...
  • Page 67 ? ? no messages from Profibus master within the watchdog time 0.2Hz ? ? Profibus cable broken, cable loose or Profibus master off line Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 68: Reference Potentiometer

    The impedance of the Ain1 input is about 200k? , so the Ain1 inputs of the other XT SERIES’ can be connected in parallel (maximum four at a time). The inputs should be wired permanently parallel to ensure constant impedance.
  • Page 69 Service Manual Page 68 Pro2V070 Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 70: Speed Sensors

    Motor maximum speed (rpm) at cable length revolution nominal speed (ppr) (rpm) NM701NR 1000 6000 6000 6000 5500 5200 5000 4800 3800 Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...
  • Page 71 Maximum nominal and ESR-speeds above are as allowed by the XT SERIES itself, but there may be other limiting factors due to mechanical reasons. Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 72: Sensor Bearing (If Applicable)

    ? ? grounded (the shield) at both ends, 360? grounding on XT SERIES terminal ? ? the shield should be grounded always when going through terminals Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 73: Proximity Switch (If Applicable)

    The speed supervision sensor is connected to the buffer amplifier KAE234 as follows: Brown Brown +24V Green Green Black Black White Blue Schönbuch INSOR ICDM 8802 Baumer IFRM08N1501/L Honeywell 3GT101DC Baumer IFRM08N1501/S35L Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 74: Buffer Amplifier Kae234 (If Applicable)

    KAE234 connection with a speed sensor. +24V +24V +24V 24V±1V Buffer amplifier pulse output measured during running. The picture beside presents the pulse output. 0±1V Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...
  • Page 75 Service Manual Page 74 Pro2V070 Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 76: Brake Controllers

    DC-circuit, which speeds closing of the brake. The purpose of the varistor is to provide overvoltage protection for K7 contacts and the brake coil. Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 77: Troubleshooting

    The purpose of troubleshooting and field repair actions is primarily to determine whether the problems are in fact caused by XT SERIES or external devices. After that, the next step is to detect the possibly damaged components inside XT SERIES. If any damage inside XT SERIES is caused by the environment (motor failure, brake failure, power supply problems etc.) it is very...

  • Page 78: Inverter Fault Codes

    ? ? SD speed difference supervision with graphical multimeter or scope ? ? SSU settings and SSU relay operation Fault is not stored into fault history. Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...
  • Page 79 Check: ? ? all parameter settings ? ? +24V voltage output loading Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...
  • Page 80 Service Manual Page 79 Pro2V070 If the fault comes again, contact authorized service. Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...
  • Page 81 ? ? reference source fault ? ? signal source ha s failed F 51 Stop limit has tripped Reset: keep controller at zero >300ms. Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...
  • Page 82 Service Manual Page 81 Pro2V070 Stop limit Ensure that fault disappears after leaving the stop limit. Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...
  • Page 83 ? ? component failure (control ? ? SSU LED’ s board or SSU board) If the fault comes again, contact authorized service Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 84: Fault Time Data Record

    0=No 1=Yes T.12 Warning 0=No 1=Yes At reference 0=No 1=Yes 0-speed 0=Not Zero Speed T.13 1=Zero Speed T.14 Subcode T.15 Module Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 85: Fault Counter

    F38, F39, F40, F44, F45, F48, F50, F54, F55, F60, F64, F65, F71, F72, F73, F74, F75, F76 V4.5.2 Total Faults Total number of all faults. Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 86: Inverter Alarm Codes

    One or both Sway Cont rol Licence Check: ? ? Licence Key numbers SwCtrlLicens Keys are incorrect or missing ? ? Sway Control mode Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 87: Service

    (minimum 100k? 2W). Discharging will take several minutes and resistor will get hot. Measure the voltage before touching the capacitor terminals. Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

  • Page 88: General Drawings

    Service Manual Page 87 Pro2V070 GENERAL DRAWINGS Closed Loop (For General Information Only) Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...
  • Page 89 Service Manual Page 88 Pro2V070 Open Loop (For General Information Only) Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...
  • Page 90 Service Manual Page 89 Pro2V070 Drivecon Inc. reserves the right to alter or ame nd the above information without notice 21.12.2004 • XT SERIESCSM55BEN...

Table of Contents

Save PDF