Electrical Installation; Names Of Components In Control Box; When Changing The Direction Of The Out Door Side Duct - Mitsubishi Electric LGH-25RVX-E Installation Instructions Manual

Installation method (continued)
6. When changing the direction of the out door
side duct (EA/OA) ···Except for LGH-150 and
200RVX-E
(1) Removal of flange cover
Unscrewing the flange cover mounting screws (4 pcs), remove
the flange cover.
Ceiling suspension fixture
Flange cover
Mounting screw
(for flange cover)
(2) Installation of duct connecting flange
1. Install the duct connecting flange using attached mounting screws.
2. Fix the removed flange cover with the removed mounting
screws (4 pcs).
Duct connection flange
Mounting screw
(Accessory parts)
Eng-6
Ceiling suspension fixture

Electrical installation

With this product, the wiring installation method will vary according to
the design of the system.
Perform electrical installation to meet local electrical regulations.
* Always use double insulated PVC cable for the transmission cables.
* Wiring work must be performed by qualified professionals.
* All supply circuits must be disconnected before obtaining access to
the terminal devices.

Names of components in control box

TM3
TM4
TB5
TM2
LED3
LED1, 2, 4
SW2, SW5
SA1, SA2
TM1