IntelliTech IntelliBar Mi Series Programmer's Manual page 36

1 | Programmer's Guide
Variable
ERRORBUZZER
WARNINGBUZZER
6, 7, 9
PRINTSPEED
9
FEEDSPEED
9
REVERSESPEED
RETRACTTIMEOUT
RETRACTDELAY
LABELPRESENTDIST
PAPERLOWWARNING
PAPEROUTWARNING
COVEROPENWARNING
AUTOLOAD
AUTOOPTIONDETECT
AUTOCALIBRATE
AUTOPRESENTDIST
6
AUTOTENSION
6
AUTOPRESSURE
6
AUTOMEDIAGLOBAL
7
PAPERLENGTH
7, 8
PAPERWIDTH
Thermal Printer Programmer's Guide
Description
Used to select the buzzer sound
for an error
Used to select the buzzer sound
for a warning
Sets the print speed of the
printer
Sets the feed speed of the
printer
Sets the speed at which the
label will be retracted into the
printer
The length of time before the
presented label is retracted to
the next top of label
The length of time before the
label is retracted at the next top
of label after the label has been
removed
The distance, beyond the
bottom edge of the label, that
the label will be presented to the
user for removal. This is
measured in decipoints.
Show paper low warning
Show paper out warning
Show cover open warning
Sensors will trigger the
automatic load process when
paper is detected
Controls the hardware
automatic detection
Automatically calibrates the
paper out sensors after loading
the paper
Enables the automatic setting of
the present distance
Enables the automatic setting of
tension
Enables the automatic setting of
pressure
Enables the automatic setting of
media parameters
Sets the print length of the label
in decipoints (1/720th of an inch)
Sets the print width of the label
in decipoints (1/720th of an inch)
30
IntelliTech International, Inc.
Range
DISABLE, SOUND1,
SOUND2
DISABLE, SOUND1,
SOUND2
20 – 80 (1/10 IPS)
0 – 120 (1/10 IPS)
0 – 50 (1/10 IPS)
0 – 1000 (sec)
10 – 1000 (ms)
0 - 2880
OFF, ON
OFF, ON
OFF, ON
OFF, ON
OFF, ON
OFF, ON
OFF, ON
OFF, ON
OFF, ON
OFF, ON
72 - 71280 (1/720")
72 - 3074 (1/720")
Default
DISABLE
DISABLE
60
0 (auto)
0 (auto)
0
70
0 (auto)
OFF
ON
ON
ON
ON
ON
ON
ON
ON
ON
2880
2880