Pjl Info Read-Back Command - IntelliTech IntelliBar Mi Series Programmer's Manual

IntelliTech International, Inc.
• Internal media setup files
After reset the touchscreen calibration procedure will appear on the display. In addition,
the services Telnet and SSH will default to on and NTP (Network Time Protocol) will
default to off.

PJL INFO Read-Back Command

A sample command is as follows:
<ESC>%-12345X@PJL INFO xxx <LF>
@PJL EOJ <LF>
<ESC>%-12345X
"xxx" is the desired parameter as noted below:
Table 10: PJL INFO Read-Back Command Parameters
Parameter
DATETIME
SENSORS
SYSTEMSTATUS
SYSTEMINFO
MEDIAFILES
SETUPFILES
LABELFILES
LANGUAGEFILES
The following is a sample DATETIME response:
@PJL INFO DATETIME
Wed Jan 4 10:53:44 EST 2012
The following is a sample SENSORS response:
@PJL INFO SENSORS
HEADTEMP=265;
HEADVOLTAGE=271;
HEADPRESSURE=7;
RIBBONLEVEL=0;
REWINDERLEVEL=0;
HEADUP=0;
HEADUNLATCHED=0;
PRESENTSENSOR=0;
CUTTERHOME=0;
COVEROPEN=1;
HEADTEMPADC=226;
HEADVOLTAGEADC=211;
TOFADC=190;
Description
Returns the date and time from the printer.
Returns value of system sensors.
Returns system status
Returns system info.
Returns list of internal media setup files.
Returns list of internal user setup files.
Returns list of internal user labels files.
Returns list of language files.
21 Thermal Printer Programmer's Guide
Programmer's Guide | 1