Pjl Job Command; Pjl Perform Command - IntelliTech IntelliBar Mi Series Programmer's Manual

IntelliTech International, Inc.
File3.stc
File4.stc

PJL JOB Command

The parameter "SECURITY" is used to allow changes to defaults for printer specific
items such as adjustments and media calibration values. The value of the SECURITY
parameter must match the printer's security key to take effect.
The following is a sample command:
<ESC>%-12345X@PJL JOB SECURITY = "0x80395AC2" <LF>
@PJL DEFAULT HEADPRESSUREADJ = 5 <LF>
@PJL EOJ <LF>

PJL PERFORM Command

The custom PJL PERFORM command is used for various functions on the printer. PJL
password security in the JOB command is used to protect against unauthorized use of
this command. Please refer to the HP PCL/PJL Technical Reference Manual for more
information on PJL security.
The syntax of the command is as follows:
<ESC>%-12345X@PJL JOB NAME = "JOB_NAME" <LF>
@PJL PERFORM PARAMETER [= value] <LF>
@PJL EOJ <LF>
The value is optional as noted below:
Table 11: PJL PERFORM Command
Parameter
DOTCHECK
EMPTYCAL
ABORTALL
CAL
FEED
HEADCLEAN
MOVE
CUT
Description
Performs a dotcheck
diagnostic on the print
head
Performs empty
calibration.
Abort all current functions
Performs media
calibration
Feeds media to next Top-
of-Form
Performs head clean
Moves media a certain
distance
Engage cutter
Value
Number of dots to
check. 0 for all
N/A
N/A
Distance in dots to
move
N/A
N/A
Distance in dots to
move
Number of cut cycles
23 Thermal Printer Programmer's Guide
Programmer's Guide | 1
Notes
Media should be
removed prior to issue
Media should be
loaded prior to issue
Must be in head clean
mode (See below)