Electrical Connections; Evaporator Connections; Engine Compartment - Carrier Neos 100S Installation And Commissioning Manual

Installation & Commissioning Manual:
Neos 100S, 20X, 30S, 35X, 40X, 50X

Electrical Connections

Evaporator Connections:

• Evaporator fan motor(s)
• Return Air Sensor (RAS)
• BPV (quench valve)
• Low Pressure switch
If required, route the Return Air Sensor
(RAS) and mount to the evaporator fan inlet.
Make all required electrical connections.
Note that most are connectors that are "plug
and play". The required electrical
connections are listed as follows:

Engine Compartment:

• CLHR (road clutch)
• BBT (quench thermostat)
®
62-11165 Rev D
18