General Features - AIREDALE SmartCool SN Series Technical Manual

SmartCool™ 6 - 200kW

General Features

Condensate Pump (Hot or Cold Water)*
Condensate Drain Tray Monitoring
Straight and "L" Shaped Ceiling Duct Extensions
Open Floorstand
Front and Rear Floorstands (enclosed)
UPS Floorstand
Sterling Board LAT (Wooden Case) Packing
●
Standard Features
*
Condensate pump type depends if humidification is selected.
Open & Enclosed Floorstand
Open or enclosed floor stands shall be available, complete with adjustable feet and floor tile lip. Enclosed floor stands
shall incorporate an air turning vane (SN,SR only). The height of the floor stand shall be specified at order.
Discharge Air Configuration
Standard configuration shall be downflow "draw through" design.
Straight and L shaped Ceiling Duct Extension
Straight and 'L' shaped duct extensions up to a height of 1350mm shall be constructed and finished to match the unit.
For extensions greater than 1350mm, please contact Airedale.
Height shall be specified at order.
Sterling Board LAT (Wooden Case) Packing
Units shall be supplied complete with additional LAT corner protection and cross braces to afford extra transit protection.
Sterling board heat treated man made material shall be used (including pallet) to comply with phytosanity import
regulations, please contact Airedale for this option.
34 SmartCool 6 - 200kW Chilled Water Technical Manual 7674716 V1.10.0_10_2018
–
○
Optional Features
Precision Air Conditioning
System Configuration
Range SN
Circuits Single Single
○ ○
○ ○
○ ○
○ ○
○ ○
○ ○
○ ○
Feature Not Available
SR SD
Dual Single Dual
○ ○
○ ○
○ ○
○ ○
○ ○
○ –
○ ○
○
○
○
○
○
–
○