Changing Image Size; Resize - Sony Cyber-shot DSC-T3 Operating Instructions Manual

 Select [OK] with , then press
.
The  indicator turns white. The
selected images are protected.
To exit the Protect function
Select [Cancel] in step  or select [Exit]
in step , then press .
To cancel individual protection
Select the image to be unprotected with
/// in step , then press . The
 indicator turns gray. Repeat this
operation for all images that are to be
unprotected. Press MENU, select [OK],
and then press .
To protect all images in the
folder
Select [All In This Folder] in step , and
press . Select [On], then press .
To cancel protection of all
images in the folder
Select [All In This Folder] in step , and
press . Select [Off], then press .

Changing image size

— Resize

You can change the image size of a
recorded image, and save it as a new file.
You can resize to the following sizes:
5M, 3M, 1M, VGA
The original image is retained even after
resizing.
Control button Mode switch
MENU
 Set the mode switch to
 Display the image you want to
resize with /.
 Press MENU.
The menu appears.
 Select (Resize) with /,
then press .
 Select the desired size with
/, then press .
The resized image is recorded in the
recording folder as the newest file.
To cancel resizing
Select [Cancel] in step .
• You cannot change the size of movies or Multi
Burst images.
• When you change from a small size to a large
size, the image quality deteriorates.
• You cannot resize to an image size of 3:2.
• When you resize a 3:2 image, the upper and
lower black portions will be displayed on the
image.
.
75